====== Router Setup ======
===== Goal =====
To provide wireless access to the sound mixer in the auditorium using an iPad.  

===== Problem =====  
  * Cell Phones use the 2.4ghz range, and once the auditorium is filled with people, the 2.4ghz band becomes overly saturated.  This causes the iPad to lose connectivity. 
  * The iPad periodically loses connectivity when a notification happens. 

===== Solution =====
  * Install a router to create a 5ghz only network for the mixer.  
  * Secure/obscure the router using a wifi password AND a hidden SSID
  * Test iPad connection from various points in the auditorium.  
  * Setup "Guided Access" mode for the m200 app.  This will stop the iPad from receiving notifications while connected to the mixer.  

===== Specs =====
  * Factory reset router
  * Set new admin router password.  (Write it down!)
  * Set router IP address to 10.20.30.1
  * Disable DHCP on router
  * Disable 2.4ghz Radio on router
  * Set 5ghz wireless name to: AHSMixer
  * Hide SSID
  * Wifi password: 

===== Resources =====
  * [[https://rolandus.zendesk.com/hc/en-us/articles/208804946-M-200i-Troubleshooting-iPad-Connection-Issues|M-200i: Troubleshooting iPad Connection Issues]]
  * [[https://rolandus.zendesk.com/hc/article_attachments/4406966542747/iPadGuidedAccessMode.pdf|Setting up Guided Access mode on the iPad]]
  * [[http://cdn.roland.com/assets/media/pdf/m200i_manual_e03.pdf|m200i Manual]]
  * [[https://static.roland.com/assets/media/pdf/M-200i_Remote_setup_e01.pdf|Instructions for setting up 5ghz Network - page 2]]
  * [[https://www.sweetwater.com/sweetcare/articles/how-to-set-up-wi-fi-routers-for-digital-mixers/#|Sweetwater Guide to setting up router for mixers]]