Router Setup

To provide wireless access to the sound mixer in the auditorium using an iPad.

• Cell Phones use the 2.4ghz range, and once the auditorium is filled with people, the 2.4ghz band becomes overly saturated. This causes the iPad to lose connectivity.
• The iPad periodically loses connectivity when a notification happens.

• Install a router to create a 5ghz only network for the mixer.
• Secure/obscure the router using a wifi password AND a hidden SSID
• Test iPad connection from various points in the auditorium.
• Setup “Guided Access” mode for the m200 app. This will stop the iPad from receiving notifications while connected to the mixer.

• Factory reset router
• Set new admin router password. (Write it down!)
• Set router IP address to 10.20.30.1
• Disable DHCP on router
• Disable 2.4ghz Radio on router
• Set 5ghz wireless name to: AHSMixer
• Hide SSID
• Wifi password:

• M-200i: Troubleshooting iPad Connection Issues
• Setting up Guided Access mode on the iPad
• m200i Manual
• Instructions for setting up 5ghz Network - page 2
• Sweetwater Guide to setting up router for mixers