Project Phoenix

User Tools

Site Tools

Trace:
auditoriumsoundsystem

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
auditoriumsoundsystem [2022/02/15 13:01]
matthews 		auditoriumsoundsystem [2022/02/22 12:45] (current)
matthews [Specs]
Line 1: Line 1:
 ====== Router Setup ====== ====== Router Setup ======
-**Goal**: To provide wireless access to the sound mixer in the auditorium using an iPad.  +===== Goal ===== 
 +To provide wireless access to the sound mixer in the auditorium using an iPad.  
  
-**Problem**:  +===== Problem =====  
   * Cell Phones use the 2.4ghz range, and once the auditorium is filled with people, the 2.4ghz band becomes overly saturated.  This causes the iPad to lose connectivity.    * Cell Phones use the 2.4ghz range, and once the auditorium is filled with people, the 2.4ghz band becomes overly saturated.  This causes the iPad to lose connectivity. 
   * The iPad periodically loses connectivity when a notification happens.    * The iPad periodically loses connectivity when a notification happens. 
  
-Solution+===== Solution =====
   * Install a router to create a 5ghz only network for the mixer.     * Install a router to create a 5ghz only network for the mixer.  
   * Secure/obscure the router using a wifi password AND a hidden SSID   * Secure/obscure the router using a wifi password AND a hidden SSID
   * Test iPad connection from various points in the auditorium.     * Test iPad connection from various points in the auditorium.  
   * Setup "Guided Access" mode for the m200 app.  This will stop the iPad from receiving notifications while connected to the mixer.     * Setup "Guided Access" mode for the m200 app.  This will stop the iPad from receiving notifications while connected to the mixer.  
 +
 +===== Specs =====
 +  * Factory reset router
 +  * Set new admin router password.  (Write it down!)
 +  * Set router IP address to 10.20.30.1
 +  * Disable DHCP on router
 +  * Disable 2.4ghz Radio on router
 +  * Set 5ghz wireless name to: AHSMixer
 +  * Hide SSID
 +  * Wifi password: 
  
 ===== Resources ===== ===== Resources =====
   * [[https://rolandus.zendesk.com/hc/en-us/articles/208804946-M-200i-Troubleshooting-iPad-Connection-Issues|M-200i: Troubleshooting iPad Connection Issues]]   * [[https://rolandus.zendesk.com/hc/en-us/articles/208804946-M-200i-Troubleshooting-iPad-Connection-Issues|M-200i: Troubleshooting iPad Connection Issues]]
   * [[https://rolandus.zendesk.com/hc/article_attachments/4406966542747/iPadGuidedAccessMode.pdf|Setting up Guided Access mode on the iPad]]   * [[https://rolandus.zendesk.com/hc/article_attachments/4406966542747/iPadGuidedAccessMode.pdf|Setting up Guided Access mode on the iPad]]
 +  * [[http://cdn.roland.com/assets/media/pdf/m200i_manual_e03.pdf|m200i Manual]]
 +  * [[https://static.roland.com/assets/media/pdf/M-200i_Remote_setup_e01.pdf|Instructions for setting up 5ghz Network - page 2]]
 +  * [[https://www.sweetwater.com/sweetcare/articles/how-to-set-up-wi-fi-routers-for-digital-mixers/#|Sweetwater Guide to setting up router for mixers]]
  
auditoriumsoundsystem.1644930078.txt.gz · Last modified: 2022/02/15 13:01 by matthews

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki